Objective. Learners accurately recall all PADI Rescue Diver knowledge review content and execute each required confined- and open-water rescue skill to the standard required for a PADI certification checkout.
This lesson, its worked examples and its practice questions has not yet been verified by a licensed professional in the field or by a certification or approval body. It is a study draft and may contain errors. Do not use it as instructions for work on a job site or on live equipment. Always follow your instructor, your supervising professional, and current official references and regulations.
VoTechWorks program approval and accreditation are still in progress. Credentials are issued only by the certifying bodies named in each program, after their own exams.
This lab session consolidates everything you need to pass the PADI Rescue Diver certification checkout. You will work through all five knowledge-review chapters, practice confined-water exercises in the pool, and complete a full open-water rescue scenario evaluated against PADI's performance requirements checklist. Zero critical skill failures are required to pass.
As an aquaculture or marine science technician, you will work in and around open water, often in remote locations with a small crew. Statistically, dive emergencies happen even to experienced divers. The Rescue Diver course trains you to recognize problems before they escalate, manage a diver in distress, and keep yourself safe while doing so. ADCI commercial dive standards also expect documented rescue competency, so this credential directly supports your ADCI Commercial Diver pathway.
1. Self-Rescue. You cannot help others if you become a victim yourself. Self-rescue skills include controlled emergency swimming ascents (CESA), buoyant ascents, managing out-of-air situations, and preventing task-loading that leads to panic. Review your own stress signals: tunnel vision, rapid breathing, freezing, or the urge to bolt to the surface.
2. Recognizing and Managing Stress in Divers. Stress is the root cause of most dive emergencies. Pre-dive stress shows as over-talking, silence, fidgeting with gear, or rushing. In-water stress presents as wide eyes, rapid breathing from a regulator, rigidity, or surface-seeking behavior. Early intervention—calm voice, eye contact, physical contact, controlled ascent—prevents escalation to panic.
3. Emergency Management and Equipment. Know the location and operation of every piece of emergency gear before entering the water: oxygen delivery unit, AED, first aid kit, rescue tube, and signaling devices. Practice the emergency action plan (EAP): summon help first, then respond. Failure to summon help is a critical skill failure on your evaluation.
4. Rescuing Panicked and Unresponsive Divers. A panicked diver can drown a rescuer. Approach from behind or at an angle. Use a rescue tube as a barrier before making contact. For an unresponsive diver at the surface: establish an airway immediately by tilting the head, remove the mask only after airway is established and ventilation is underway, signal for help, and begin in-water rescue breathing while towing to exit. Airway management is a critical performance item—any failure here ends the scenario.
5. Post-Rescue Care. After removing the victim from the water, assess responsiveness and breathing. If absent, begin CPR immediately and attach the AED as soon as it is available. Follow current American Heart Association or equivalent BLS guidelines for compression-to-ventilation ratios for adults. Document the incident timeline for EMS handover.
Practice each skill to the point of automatic execution. PADI evaluates performance, not just attempts.
Safety note: Always have a dedicated water-safety observer (a classmate or instructor not acting as victim) present during pool rescue exercises. Follow your facility's lockout/tagout procedures for pool equipment. Wear appropriate PPE—wetsuit if water is cold—and inspect all scuba gear using a full buddy-check before entering water.
Your instructor will run a timed, full-sequence scenario:
1. Missing diver: Deploy an appropriate search pattern (expanding square or U-pattern) based on last-known position.
2. Locate and surface the diver: Establish positive buoyancy for yourself and the victim.
3. Airway and rescue breathing: Establish airway before removing the mask. Begin rescue breathing immediately if the diver is not breathing.
4. Tow to exit: Maintain rescue breathing every five seconds throughout the tow.
5. Transition to CPR/AED: Once on the surface, begin compressions if there is no pulse, attach and use the AED as soon as possible.
Your evaluator will mark against the PADI Rescue Diver performance requirements checklist. Three actions are automatic critical failures: failure to establish and maintain the airway, failure to summon help, and abandoning the victim at any point.
Know the material, trust your pool practice, and execute each step deliberately. Rescue diving is about controlled, methodical action—not speed for its own sake.
Answer each question, then check it. Nothing is recorded; this is your own practice.
A free tech program — complimentary, as our commitment to get America working. Help us build VoTechWorks. Tell us what works, what doesn’t, and what you want to learn.
Does the school offer financial aid?
No. We don’t offer financial aid because we’re free. No, really: completely free.
Do you offer industry certification?
No. We are not certified yet, so we can’t offer that to students. What we do offer is knowledge and understanding of a trade.
Enroll first in the trade you’re interested in. You get your key, your program opens, and you begin studying.
Enroll free →